Intended Use; Control Elements; Can Bus Interface - Dometic MagicSpeed CBI 200 Instrucciones De Montaje Y De Uso

CBI200
4

Intended use

MagicSpeed CBI200 is an interface for converting digital CAN bus signals into analogue signals.
CBI200 decodes the digital signals from the on-board vehicle electronics and transmits analogue
signals to the outputs.
MagicSpeed CBI200 is designed for installation in passenger vehicles with a CAN bus port.
5

Control elements

See fig. 3
No. Description
1 Status LED
2 14-pin socket
3 Software version for the module
6

CAN bus interface

See fig. 4
No. Description
1 White wire: connection to CAN High
2 Blue wire: connection to CAN Low
4 Black wire: connection to earth
9 Green wire: speedometer signal
11 Brown wire: "Reverse gear engaged" signal
13 Violet wire: "Ignition switched on" signal
14 Red wire: connection to a cable that is protected with max. 5 A
EN
Intended use
5