Advanced Settings - Velleman VWS2 Manual De Instrucciones

8. Advanced Settings

Click 'System Config' for the advanced settings:
1. Network setting: check with your network administrator or Internet service provider.
2. Mail setting: upon an alarm trigger, the video server will e-mail the current picture to the assigned recipients.
3. FTP settings: upon an alarm trigger, the VWS2 will upload the current picture to the assigned FTP site.
4. Account Management: add/remove users (max. 6) and set authority.
VWS2
Web port: port used to control the VWS2
Mac: the equipment's physical address
IP type: this device only supports static IP address ; to use a
dynamic IP, a router is needed.
If the password needs not to be verified, set 'Verify Password" to
'No'.
Also see "10. c. Send E-mail" on p.8.
The default uploading port is #21.
User levels:
SUPERVISOR: control all functions
USER LEVEL: control advanced functions
GUEST LEVEL: control basic functions only
Life time: you can set a period during which the user is allowed to
control the VWS2.
- 4 - VELLEMAN