The Seat - Mutsy evo Manual De Instrucciones

Ocultar thumbs Ver también para evo:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
in a lying position.
· The pram body is not suitable for chil-
dren who can sit or roll independently
or who can raise themselves on their
hands and knees.
· This pram body can only be used on the
frame and not as a standalone cot.
· Regularly check the bottom and the bor-
ders of the pram body on wear and tear.
· Make sure that the frame has fully been
unfolded and the brake blocked during
all actions indicated below.
Place the pram body adapters (j)
· There are two foldable attachment
points on both sides of the frame. Make
sure that the attachment points are in a
vertical position.
· The adapter marked with 'R' is placed
on the right side of the frame, the adapt-
er marked 'L' is placed on the left side.
· Slide the adapters in the attachment
parts and press solidly until you hear
a click.
Place the pram body (k)
· Orientate the pram body such that it is
directed rearwards on the frame.
· Hold the pram body by the handles on
both sides and place directly above the
adapters.
· Slide the pram body over the adapters
and press solidly until you hear a click
on both sides.
· Check that the pram body has been
placed horizontally and has been at-
tached properly by trying to lift it from
the frame.
Remove the pram body (l)
· Hold the pram body by the handles on
both sides. Press and hold the unlock
buttons.
· Lift the pram body in vertical direction
of the adapters.
14
Remove the pram body adapters (m)
· Pull the unlock buttons on the inside
of the adapters upwards and vertically
remove the adapters from the attach-
ment points.
The hood (n)
· The hood can be unfolded by moving it
upwards.
· Push and hold the buttons on both
sides of the hood. The hood can now be
folded downwards.
The carry straps
· The carry straps must be clicked into
the plastic components in order to carry
the pram body.
· Always ensure that the carry straps
have been removed if a child is placed
in the pram body.
Assemble the rain cover on the pram
body (o)
· Make sure that the hood of the pram
body has been unfolded.
· Place the rain cover from top to bottom
over the pram body and make sure that
the rain cover attaches well all around
the bottom of the pram body.

The seat

· The seat is suitable for children from
birth up to 55 lbs. (25 kg) and 42.7
inch (108 cm) in height. If your child
is younger than 6 months always use
the pram body or the reclined carriage
position of the seat.
· The seat can be folded and unfolded
with the frame and does therefore not
need to be removed from the frame.
· The back support and leg support are
adjustable.
· Make sure that the frame has fully been
unfolded and the brake blocked during
all actions indicated below.

Publicidad

Tabla de contenido
loading

Tabla de contenido