Kenwood GARMIN GTM 10 Manual Del Usuario página 3

Activating a Subscription
The GTM 10 package provides a 90 day subscription to a pay service. Your subscription activates when
the GTM 10 first receives traffic signals from the pay service. The GTM 10 can also use any free services
available.
To renew your FM subscription or purchase an additional subscription, go to Garmin's FM Traffic Web
site at http://www.garmin.com/fmtraffic. Follow the steps on the Web site to obtain a 25-character Traffic
Subscription Code. Enter the 25-character code in your GPS device. Refer to the confirmation e-mail
or Web page, or the GPS device's Owner's Manual, for specific instructions about entering the Traffic
Subscription Code.
NOTE: You do not need to activate the subscription that came with your GTM 10.
The Traffic Subscription Code cannot be reused; you must obtain a new code each time you renew your
service. The code is specific for the GTM 10 it was purchased for; it cannot be used on multiple GTM 10
devices.
Step 5: Mount the GTM 10
If possible, place the GTM 10 where the LED can be seen without dismantling the dashboard.
1. Mount the GTM 10:
• Attach with foam tape: clean and dry a flat surface behind the dashboard. Remove the backing
from the foam tape and attach the GTM 10 to the flat surface.
• Hang freely: bind up any slack cable from the mini-B USB cable with a wire tie and let the GTM 10
hang freely behind the radio.
2. Check that all cables and the GTM 10 are secure and free of obstruction.
3. Replace all parts of the dashboard to their original locations.
EN-3