Mains Port - Abicor Binzel ABIDRIVE V2 Instructivo De Servicio

TIG cold-wire feeder

6.8 Mains port

DANGER
Dangerous voltage
Electric shock caused by incorrectly installed and damaged cables. For the complete duration of work:
• Connect the ABIDRIVE only to properly earthed power sockets.
• Check all live cables and connections for proper installation.
• Replace defective, deformed or worn parts.
NOTICE
• For the mains voltage and fuse protection, please refer to the technical data or the nameplate.
 4 Scope of delivery on page EN-6
 Fig. 20 Overview of connections and control elements on page EN-24
1 Connect the female connector to port X2.
2 Connect the mains plug (9).
6.9 Feeding in the wire
WARNING
Risk of crushing
Hands can be pulled in and crushed by moving wheels.
• Do not reach into moving wheels.
CAUTION
Risk of injury
Physical injury caused by the start of the wire.
• Keep cold-wire feed at the torch head away from the body.
1
5
1 Pressure lever
2 2 pressure rolls
3
Central socket
Fig. 16 Feeding in the wire
BAL.0415.0 • 2018-10-22
6 Putting into operation
2
1
4
4 2 drive rolls
5 Liner
3
EN - 21