Sunbeam heated bedding Manual Del Usuario página 13

Q What does "F1" or "F2" mean on my Electronic Digital Control?
A The digital controls are designed to notify you in the event that a problem has been discovered
by flashing "F1" or "F2" on the display.
Models: SelectTouch ™ and SleekSet ™
F1
Follow reset instructions below.
Models: SelectTouch ™ and SleekSet ™
F2
Follow reset instructions below.
Reset Instructions
1.) Follow the instructions on the flag tag attached to the control cord to reset control.
2.) Check the blanket/mattress pad for visual damage.
3.) If no visual damage is found, unplug the system from wall outlet.
4.) Check that the control is well-connected to the module.
MODULE
Ensure the Control Cord connector and module are securely
fastened by inserting until hooks are in locked position.
5.) Plug the power cord into the wall outlet.
6.) Set the control to "On".
7.) If the system does not operate after 2 or 3 times trying to reset, disconnect the power cord
and contact Consumer Care.
Q What does a flashing light mean on my OneSet™, Easy Set™, Prime Style™ AO
or Elite Style™ control?
A These controls are designed to notify you in the event that a problem has been discovered
by flashing the light on the control. Follow instructions on the flag tag to reset control. First,
check the heated product for visual damage. If no visual damage is found, unplug the system
from wall outlet. Check that the control is well-connected to the module. Plug the power cord
into the wall outlet and turn the control On. If the product still does not operate after 2 or 3
times trying to reset, disconnect the power cord and contact Consumer Care.
For questions or support, please visit www.sunbeambedding.com.
Sunbeam HeatedBedding IB_17ESM1.indd 13
E13
2/3/17 09:09