Mitsubishi Electric PAR-21MAA Manual De Instrucciones página 21

[Function selection flowchart]
[1] Stop the air conditioner to start remote controller function selection mode. → [2] Select from item 1. → [3] Select from item 2. → [4] Make the setting. (Details are specified in
item 3) → [5] Setting completed. → [6] Change the display to the normal one. (End)
Normal display (Display when
the air condition is not running)
(Hold down the E button and press the D button for two
seconds.)
* The display cannot be changed during the unit function
selection, the test run and the self diagnosis.
Item 1
Press the G button.
Change Language
("CHANGE LANGUAGE")
Press the
→ Operation function limit setting ("LOCKING FUNCTION")
E button.
Function limit
Use of automatic mode setting ("SELECT AUTO MODE")
("FUNCTION
Press the
SELECTION")
G button.
Temperature range limit setting ("LIMIT TEMP FUNCTION")
Press the Press the
E button. E button. → Remote controller main/sub setting ("CONTROLLER MAIN/SUB")
Press the
Use of clock setting ("CLOCK")
G button.
Mode selection
("MODE
Timer function setting ("WEEKLY TIMER")
SELECTION")
Contact number setting for error situation ("CALL.")
Press the
E button.
→ Temperature display °C/°F setting ("TEMP MODE °C/°F")
Press the
Display change G button.
Suction air temperature display setting ("ROOM TEMP DISP SELECT")
("DISP MODE
SETTING")
Automatic cooling/heating display setting ("AUTO MODE DISP C/H")
(Hold down the E button and press
the D button for two seconds.)
* The remote controller records the
setting that is made in this way.
Remote Controller Function Se-
lection Mode
Item 2
Press the G button.
Press the G button.
Press the G button.
– 21 –
NOTE
Timer operation stops when the display for
remote controller function selection is
changed to the normal one.
See [4]–1
Dot display
Item 3
The language that is selected in
(Setting content)
CHANGE LANGUAGE mode ap-
pears on this display. English is
See [4]–2. (1)
Press the set in this manual.
D button.
See [4]–2. (2)
See [4]–2. (3)
Press the
D button.
See [4]–3. (1)
F
See [4]–3. (2)
See [4]–3. (3)
E
BACK MONITOR/SET
PAR-21MAA
See [4]–3. (4)
G
Press the
D button.
See [4]–4. (1)
See [4]–4. (2)
See [4]–4. (3)
TEMP. ON/OFF
I
A
MENU ON/OFF FILTER
DAY CHECK TEST
B
CLOCK OPERATION
CLEAR
H
C D