Repair; Intended Environment; Power Supply - Medion MD 30325 Manual Del Usuario

Repair

• Leave all repairs of your LCD TV to authorized and qualified personnel only.
• Should a repair be necessary, please contact one of our authorized service center.

Intended Environment

• The device can be operated at an ambient temperatures of between 5° C to 35° C and at a
relative humidity between 20% and 85% (without condensa-tion).
• When switched off, the monitor can be stored most reliably be-tween -20° C - +60° C).
• Provide an interval of at least one meter from high-frequency and magnetic sources of
interference (television sets, loudspeakers, mobile telephones, etc.) in order to avoid
malfunctions and data loss.
• After transporting your LCD TV please wait until it has assumed the ambient temperature before
connecting and switch-ing it on.
• Large variations in temperature and humidity can cause condensation to occur inside the LCD-
TV, which may cause an electrical short circuit.
• Disconnect the power plug from the power socket and the aerial from the aerial connection
during storms or if the device is not being used for a long time.

Power Supply

Please pay attention: Pats of the device are still live, even if the mains switch is
switched off. Pull the mains plug out of the socket, to interrupt the power supply to your
LCD TV or to release the device from voltage completely.
• Operate your TFT display mains (power supply) only on grounded sockets with 230 V ~ 50 Hz.
If you have doubts about the power supply in the location where the LCD-TV is installed, consult
your energy supplier.
• For additional safety we recommend use of an excessive voltage protection device to protect
your LCD TV from damage resulting from voltage surges or lightning.
• To interrupt the display from mains (power supply) disconnect the plug from the socket.
• The power socket must be in the vicinity of your LCD TV and within reach of the power cables.
• If you use an extension cable, please ensure that it complies with the VDE requirements. If
necessary consult your electrical equipment supplier.
• You should lay the TFT Display cables in a manner that no one can trip or step on it.
• To avoid damage of cable do not place any objects or furniture on the cable.
EN
7