Klarstein Storm Tower Manual Del Usuario página 13

Modes of operation
Gently press the MODE button on the control panel or remote control,
to select Normal Wind, Natural Wind, or Sleep Mode.
Oscillation Function
This fan is equipped with a swing function to cool large rooms efficiently.
• Starting the oscillation: Press the OSC button on the control panel or remote control.
• Stop the oscillation: Press the OSC button a second time.
Timer operation
This fan is equipped with a timer. The timer can be set between 1-12 hours. After the
timer has expired, the unit is automatically switched off or on.
• Set the off timer: Press the TIMER button on the control panel or on the remote
control several times during operation. Each time the button is pressed, the timer
increases by 1 hour. Then wait briefly until the entered time has been accepted.
After the timer has expired, the unit switches off automatically.
• Set the power-on timer: In standby mode, press the TIMER button on the control
panel or remote control repeatedly. Each time the button is pressed, the timer
increases by 1 hour. Then wait briefly until the entered time has been accepted.
After the timer has expired, the unit will start automatically.
Ioniser function
Press the ANION button on the control panel or remote control to turn on the ionizer
function. Press the button again to turn the function off. The function of the ionizer is to
enrich the air with negative ions (particles with a negative electrical charge). These
particles bind to all impurities in the air and neutralize them.
EN
13