Tools Required - Octane Fitness PRO3700 Instrucciones De Montaje Y Seguridad

SIDE STEP KIT for Pro3700/Pro4700
Kit Contents
 Left Side Foot Platform
 Right Side Foot Platform
 Assembly and Saftey Instructions
 Hardware Kit (see illustration)

Tools Required

 4mm hex key wrench (included)
 17mm drive socket, wrench and extension
Assembly Instructions
 Remove rear plastic cover.
 Remove side track cover with
4mm hex key wrench.
 Remove rear leveler.
 Fasten side step to machine
with bolt A (Qty 2), nut C (Qty 2),
lock washer B (Qty 2), and flat
washer D (Qty 4). Tighten to 30
ft-lbs.
 Replace rear leveler and tighten
by hand.
Repeat  -  for other side.
 Replace side track covers.
 Replace rear plastic cover.
 Level machine using front
levelers.















ENG-1