Publicidad
Idiomas disponibles
Idiomas disponibles
To reduce the risks associated with all residual hazards:
• Read, understand, follow and retain for future reference all safety statements in
each applicable equipment owner's manual and refer to the applicable Material
Safety Data Sheet and material container label for each material to be sprayed
before using your 3M equipment.
• This equipment is to be used only by professionals familiar with the possible
applicable safety hazards.
• Do not use this product around unsupervised children.
• Never modify any part of this product.
• Always comply with local, state, and national codes governing ventilation, fire
protection, operation, maintenance, housekeeping and disposal plus all safety
statements in applicable owner manuals, MSDS and material container labels.
To reduce the risks associated with chemical exposure:
• Never point a spray gun at anyone else or place any part of your body in front of
a spray nozzle.
• Before use, check spray equipment for damage and proper function and repair/
replace worn, damaged or malfunctioning components.
• Always wear appropriate, approved personal protective equipment for eye,
skin, respiratory and hearing protection per the applicable MSDS and material
container labels at all times when spraying.
To reduce the risks associated with fire and explosion:
• Must maintain adequate ventilation per applicable MSDS and material container
labels for each material being sprayed in the work area.
• All ignition sources, such as smoking, must be kept out of the spray area.
• Always maintain a readily available, approved fire extinguisher or other approved fire
fighting equipment in the spray area.
• Always locate turbine unit/compressor as far away from spray area as the air
supply hoses allow.
• Never use solvents containing Methylene Chloride, Trichloromethane or
other halogenated solvents for any reason to avoid a possible violent,
explosive chemical reaction when exposed to aluminum or zinc (refer to the
manufacturer's MSDS or contact material supplier if there is any doubt to
confirm compatibility).
To avoid risk associated with or exposure to hazardous liquids:
•
Cup must be promptly removed from spray gun washer and dried to avoid cup swelling.
WARNING
3
Publicidad
