Jotul F 250 Manual Del Usuario página 13

Table of contents
Installation manual with technical data
1.0 Relationship to the authorities ................... 13
2.0 Technical data .............................................. 13
3.0 Installation .................................................. 14
4.0 Service ........................................................... 15
5.0 Optional Equipment .................................... 15
Figures .................................................................... 31
Table of contents
General use and maintenance manual
6.0 Safety precautions
7.0 Choice of fuel
8.0 Use
9.0 Maintenance
10.0 Operational problems - troubleshooting
On all our products there is a label
Product:
Jøtul
indicating the serial number and
Room heater fired by solid fuel
year. Write this number in the
Standard :
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials: place indicated in the installation
Emission of CO in combustion products :
Flue gas temperature :
Nominal heat output : instructions.
Efficiency
:
Operation range :
Fuel type
:
Operational type :
The appliance can be used in a shared flue.
Always quote this serial number when
Country Classification Certificate/ Approved by
contacting your retailer or Jøtul.
standard
Norway Klasse II
SP Sveriges Provnings- och
Sweden SP
OGC
Forskningsinstitut AB
SP Swedish National
Testing and Research
EUR Intermittent EN
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no.
Serial no: Y-xxxx, Year: 200x
Manufacturer: 221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
uniteD kingDom
1.0 Relationship to the
authorities
Installation of a fireplace must be according to local codes and
regulations in each country.
All local regulations, including those that refer to national and
European standards, shall be complied with when installing the
product.
Instructions for mounting, installation and use are enclosed with
the product. Prior to using the product the installation must be
inspected by a qualified person.
A product data label in heat resistant material can be found on the
heat shield at the back of the product. This contains information
about identification and documentation for the product.
2.0 Technical data
Material: Cast iron
Finish: Grey paint/blue black enamel
Fuel: Wood
Log length, max: 30 cm
Flue outlet: Top
Flue pipe dimension: Ø150 mm, 177 cm
Weight: 110 kg
Optional equipment: Aluminium panel, Soap stone panel
Dimensions, distances: See fig. 1
Technical data according to EN 13240
Nominal heat output:
Flue gas mass flow:
Recommended chimney draught:
Efficiency:
CO emission (13% O ):
2
CO emission (13% O ):
2
Flue gas temperature:
Operational type:
Dust emission according to DIN (13% O
Intermittent combustion is here taken to mean normal use of a
fireplace. I.e. that a new flame chamber is lit as soon as the fuel
has burnt down to the appropriate quantity of embers.
cross section
2
6,0 kW
6,9 g/s
12 Pa
82%@6,9 kW
0,06%
3
750 mg/Nm
220 C
o
Intermittent
3
): 35 mg/Nm
2
13