Hkoenig FRY800 Manual De Usuario página 7

Use
1. Put the mains plug in an earthed wall socket.
2. Click the ON/OFF button
3. Click temperature increase/decrease button to set proper temperature for cooking.
4. Click Time Decrease Button to set 3 minutes for preheating. Click the ON/OFF button
once more to start cooking. After this, the device is ready for use.
5. When the time to 0, carefully pull the fry pot out of the appliance, place the ingredients
inside the fry basket (Attention: do not exceed the maximum line); well connect the fry basket
with fry pot, slide the pan back to the appliance.
a) Never use the pan without the basket in it.
b) Do not touch the pan during and some time after use, as it gets very hot. Only hold the
pan by the handle.
6. Click the mode selection button to switch and choose appropriate cooking model or
click temperature increase/decrease button & time increase/decrease button to choose
appropriate time&temperature；
7. Click the ON/OFF button once more to start cooking；
8. When you hear the timer beep, the set preparation time has elapsed. Pull the pot out of
appliance and place it on a heat-resistant surface.
9. Check if the ingredients are ready. If the ingredients are not ready yet, simply slide the
pan back into the appliance and set the timer to a few extra minutes.
10. If the ingredient ready, carefully pull out the pan, and press the basket release button
and lift the basket out of pan to remove the ingredients. Do not turn the basket upside down
with the pan still attached to it, as any excess oil that has collected on the bottom of the pan will
leak onto the ingredients.
11. Empty the basket into a bowl or onto a plate. When a batch of ingredients is ready, the
appliance is instantly ready for preparing another batch.
Tips:
l
Add some oil on the ingredients for a crispy result..
l
Shaking ingredients halfway during the preparation time optimize the end result and
can help prevent unevenly fried ingredients. To shake the ingredients, pull the pan out of the
appliance by the handle and shake it. Then slide the pan back into the appliance. Do not press
the basket release button during shaking.