UV STERILIZER BOX
6
Location of controls
CONNECTING TO POWER
1. Place the UV Sterilizer Box on a flat, solid, stable surface.
2. Plug the small connector of the included USB power cable into the power port on the back of
the sterilizer.
3. Plug the large connector into a USB power source such as the USB port on a computer, or a
5V/2A USB adapter (not included) and plug into a wall outlet.
USING THE UV STERILIZER BOX
1. Set up the sterilizer & connect to power.
2. Open the cover of the sterilizer from the front, and place the device you would like to clean
inside of the sterilizer.
3. Close the lid.