Descargar Imprimir esta página

Polk SB225 Manual De Instrucciones página 3

Publicidad

Idiomas disponibles

Idiomas disponibles

Sound Bar & Remote Buttons
Power On/Off
Source Select
(on Sound Bar)
Increase/Decrease
Volume
Mutes and unmutes
the sound
LED Guide
There are four LEDs on the front of the bar.
Power
On—Active source (in white) displayed for 3 seconds then
fades out until another button is pressed (volume, source, etc.).
Sleep/Standby—LED 1 pulses
Source Select
Source 1 Optical—LED 1 flashes green while recognizing
the Dolby signal, then shines green in Dolby Digital; in PCM
LED 1 shines white.
Source 2 Analog—LEDs 1 and 2 shine white
Souce 3 Bluetooth—LEDs 1, 2 and 3 shine white when
connected; LEDs 1, 2 and 3 pulse when in discovery mode.
Volume
Vol Up—Each LED reflects 7 steps of volume increase.
When max volume is reached (28 steps) all four LEDs
flash twice then turn off.
Vol Down—Each LED reflects 7 steps of volume decrease.
When Mute is reached (28 steps) LED 1 flashes 1x/sec
until taken out of Mute.
Mute-LED 1 flashes 1x/sec until unmuted.
Learn
Enter Learn Mode—LEDs 1 thru 4 cycle on/off repeatedly until
a button to be learned is pressed or it times out.
Button Selected on bar—LEDs 1 thru 4 shine white
Pressing the remote button to be learned—LEDs 1 thru 4
flash white with every press until command learning is
successful or fails.
Command learned—LED 1 flashes green 3x
Command fail—LEDs 1 and 3 flash together, then LEDs 2 and 4;
repeats 3x (after unsuccessful learn, bar will exit Learn mode;
display returns to source).
Command erased—LED 1 blinks green, then white 3x.
Wall Mounting Your Sound Bar
If you choose to wall mount your Sound Bar, ensure that
your wall anchors secure properly into the wall and that
they can bear the weight of the Sound Bar.
Overall Dimensions
1. 3 7/16" H (8.73 cm)
2. 31" (78.74 cm)
Keyhole Slots
3. 19 13/16" W (50.32 cm)
1
Top of Bar to Keyhole Slots
4. 1 5/16" (3.33 cm)
Optical Source 1 Mode
(on Remote)
Aux Source 2 Mode
(on Remote)
Bluetooth Source Mode
(on Remote)
Increase/Decrease Bass
(on Remote for optional sub)
Connecting your Sound Bar to your TV
Source 1: Digital Optical Hookup
Source 2: Analog Hookup
2
2
4
3
Customer Service Hours of Operation: Monday-Friday, 9
TV
ANALOG
AUDIO OUTPUT
R
L
DIGITAL OPTICAL
AUDIO OUTPUT
TV
ANALOG
AUDIO OUTPUT
R
L
DIGITAL OPTICAL
AUDIO OUTPUT
AM
-5:30
PM EST
polkcs@polkaudio.com
3

Publicidad

loading