Installation And Operation; Installation - Bartscher Deluxe 370164 Instrucciones De Uso Originales

5. Installation and operation

5.1 Installation

Positioning

Unpack the device and remove all packing material.
CAUTION!
Never remove the rating plate and any warning signs from the device.

Place the device on top of an even, stable, dry, and water-resistant surface which
supports the weight of the device and is not heat sensitive.

The surface where the device is installed must be easily accessible and large.
Keep a distance of 15 cm at the rear, right and left of the device, and 50 cm at the
top and front. This ensures ease of use and proper air circulation.

Never place the device in wet or humid places.

Never place the device on a flammable surface.

Never place the device near an open flame, electric ovens, heating ovens and
other sources of heat.
Connection
DANGER! Electric shock hazard!
The device can cause injuries due to improper installation!
Before installation and connecting the local power grid
specification should be compared with that of the device
(see rating plate). Connect the device only in case of
compliance! Connect the device only to properly installed
single socket with protective terminal.
Do not disconnect the supply cable by pulling it, always
pull the plug.

The electrical circuit in the socket must be secured to at least 16A. Only connect the
device directly to the wall socket; do not use any extension cords or power strips.

Place the device so that the plug is easily accessible and can be quickly removed
from its socket in case of necessity.
- 32 -