Mount Thermostat And Outdoor Sensor - Honeywell RedLINK Manual Del Usuario

6
Mount thermostat & outdoor sensor
3/16" holes for drywall
7/32" holes for plaster
Wall anchor
Detach
wallplate
Outdoor sensor (optional)
To check location before mounting: Restore
thermostat Home screen, then hold the
sensor where you intend to install it and press
CONNECT
the
properly, thermostat will switch to display
outdoor temperature and humidity.
M28491
button. If sensor is working
Français : voir la page 21 • Español: vea la página 41
Wallplate
Mount the sensor on
a vertical exterior wall,
at least 6 inches below
any overhang. Choose a
location protected from
direct sunlight.
Place sensor securely
in bracket, facing
away from wall.
Press and release
13
Mounting screw
M28490
M28492A
M28483
69-2091EFS—09