Important Information about this product
!
Best Results are achieved when the camera is looking down on the subject area.
!
The hood can be used to stop sunlight entering the lens and causing the picture to wash out
during bright daylight.
!
Please test all devices before final installation as it is far easier to rectify problems at this stage.
!
To avoid the risk of damage to your product, use only the supplied power adaptors.
!
Areas with a bright background may caused degradation of the image. If possible position
your camera so that it doesn't point towards a very bright light source.
!
Do not cut the DC power cable of the Camera to fit with another power source. This
may result in damage to the Camera & any unauthorised modifications will void your
warranty.
Tips for using your Swann Security camera
1.
Deterrence is the best and most cost effective security method for:
- preventing criminal activity before it occurs is preferable to, and cheaper than, cleaning
up after it occurs
- the Swann Maxi Day/Night Camera is an example of cost effective security utilising
the 'art of deterrence' to outsmart thieves and criminals
2.
Always place cameras high enough that they can't be closely inspected or easily accessed.
3.
Position cameras and dummies where they can be easily seen for maximum deterrence.
4.
Position a monitor where it can be seen but not touched.
5.
If you have more than one camera use a monitor with channel switching function, a Quad
Processor or DVR with multiple views to show potential offenders the level of coverage you
have protecting your site.
6.
Add extra Swann dummy cameras to give the impression of heightened security.
7.
Purchase a Swann DVR to monitor and record activity on your cameras. Depending on the
settings used, DVRs can record for months.
8.
Position a VCR with tapes or boxes close to your monitor for added effect,
implying there is a security video recorder even if there isn't one.
6