Before Getting Started - Parrot FPV PACK Guía De Utilización Rápida

BEFORE GETTING
STARTED
Before use, refer to the Battery section in the General
Information category.
CHARGING THE PARROT
BEBOP 2'S BATTERY
1. Select the adapter (supplied) corresponding to your
country and connect it to the charger.
2. Connect the charging cable (supplied) to the charger.
3. Connect the battery to the charging cable and plug
the charger into an available power outlet.
The indicator light is red during charging and then turns
green when the battery is charged. The battery charging
time is about 55 minutes. Flight time is approximately
25 minutes.
CHARGING THE PARROT
SKYCONTROLLER 2'S BATTERY
1. Select the adapter for your country and attach it to
the charger.
2. Connect the Parrot Skycontroller 2 to the charger,
and then plug the charger into the mains. The charge
time is approximately 1 hour 40 minutes for 4 hours
of use.
9