Starting Up The Terminal; Screen Icons (By Default); Network Status; Battery Level - Vokkero Audio Pro Guia Del Usuario

VOKKERO GUARDIAN EUROPE Audio Pro - User Guide V1.3.1

3. STARTING UP THE TERMINAL

Before starting your terminal, make sure that it has been properly charged using a compatible char-
ger.
• Press the On/Off button to turn on the terminal.
Note 1: all settings, including volume, remain unchanged when the terminal is turned off (i.e., will be identical when the termi-
nal is turned again).

3.1. Screen Icons (by Default)

Network status

Shows that the terminal is
connected to a network.

3.2. Setting up Audio Conference

You can set up a VOKKERO audio conference. The first step consists in attributing the Master role (M1) to a single terminal. This
role is used to synchronize the other terminals.
The Master role (M1) is automatically attributed to the terminal
located in the first slot of the configurator during a quick configuration
(see §4.2).
If you want to add other terminals to an existing audio conference
chain without having to reposition all the terminals on the configura-
tor, the first configurator slot must remain available.
The LCD screen should turn on and display the VOKKERO® logo. The LED above the On/off
button should also light up permanently.
Next, the Welcome Screen displays, followed by the product name. By default, the product name
""Guardian" displays. This text can however be customized in the configurator for each terminal
(refer to §4.3.1).
• To turn off the terminal, press and hold the "on/off" button.
Role
Indicates the role of the terminal
M1: Master role
2 to 16: Other roles
Channel
Number of the commu-
nications channel.

Battery level

Microphone status
Either no microphone connected, or
microphone Off.
EN
41 / 106