Electrical Information; Electrical Connection - Gaggenau AH 900761 Instrucciones De Utilización Y De Montaje

$
Important information

Electrical connection:

Observe the specifications on the rating plate. The
unit may only be connected by an authorized
electrician, who is responsible for the proper
functioning at the time of installation.
He must explain operation of the unit to the User
with reference to its instruction manual.
If the appliance cannot be disconnected completely
from the power supply by means of an accessible
plug, then a switch, fuse or circuit breaker which
complies with local code must be installed.
The User should be instructed on how to
disconnect the appliance in an emergency.
Notes on repair:
If the appliance does not function correctly check
the fuses first. If the power supply is functioning
correctly but your appliance still does not work,
notify your Gaggenau dealer, who will provide you
with the address an telephone number of your
nearest factory authorized service agent or contact
Gaggenau USA, +1 877 4GAGGENAU.
Repairs may only be carried out by authorized
electrician in order to guarantee the safety of the
appliance. Unauthorized tampering with the
appliance will invalidate any warranty claims. The
appliance must always be disconnected from the
power supply when being repaired.
14
Old appliances are not worthless rubbish. Valuable
raw materials can be reclaimed by recycling old
appliances. Before disposing of your old appliance,
render it unusable.
You received your new appliance in a protective
shipping carton. All packaging materials are
environmentally friendly and recyclable. Please
contribute to a better environment by disposing of
packaging materials in an environmentally-friendly
manner.
Please ask your dealer or inquire at your local
authority about current means of disposal.
The extractor hood can be used in exhaust air or
circulating air mode.
Always mount the extractor hood over the centre of
the hob.
The extractor hood must not be installed over a
solid fuel cooker – a potential fire hazard (e.g. flying
sparks) – unless the cooker features a closed, non-
removable cover and all national regulations are
observed.
The smaller the gap between the extractor hood and
hotplates, the greater the likelihood that droplets
will form on the underside of the extractor hood.
Additional information concerning gas cookers:
When installing gas hotplates, comply with the
relevant national statutory regulations (e.g. in
Germany: Technische Regeln Gasinstallation
TRGI).
Always comply with the currently valid regulations
and installation instructions supplied by the gas
appliance manufacturer.
Only one side of the extractor hood may be installed
next to a high-sided unit or high wall. Gap at least
2".