Tria 4X Guia De Inicio Rapido página 3

BEFORE FIRST TREATMENT
For detailed directions and warnings, please read the complete Instructions for Use
guide before use.
HOW TO TREAT
Before every treatment, shave, clean and dry the area you wish to treat. Before your first full treatment
on any new area, perform a patch test in that area. Repeat treatments every 2 weeks for up to 3 months
or until you're satisfied with results.
1
TURN ON DEVICE
Unplug the Tria Laser 4X from the battery
charger and press the power button.
2
UNLOCK
Unlock the device by holding the Skin Sensor
against the skin in the area you wish to
treat. If the Tria Laser 4X is safe for your skin
tone, a tone will sound and the Tria Laser
4X will unlock (if device doesn't unlock, see
Instructions for Use for more information).
CHARGE: Charge the Tria Laser 4X until the battery light is full (~2 hours).
Unplug before use.
3
SET THE TREATMENT LEVEL
Press the power button to adjust levels.
For best results, use the highest setting
that you can tolerate.
4
TREAT. HOLD FOR 2 BEEPS.
•
Touch and hold the treatment window
to the skin until you hear two beeps.
•
After the two beeps have sounded,
lift the laser and place it back on the
skin so that it overlaps the previous spot
(about 1/4 inch or 5 mm).
1 2 3 4 5
5
KEEP GOING TO COVER THE AREA
Use the Tria Laser 4X Pulse Counter as a guide
to how many pulses you may need to cover
each area per treatment.