Greenlee 45658 Manual De Instrucciones página 8

Procedure (cont'd)
13. Clean the endface with a wipe saturated in alcohol.
14. Repeat the polishing step using 1 µm polishing
paper, performing no more than 20 "traveling
figure-8s."
15. Clean the endface with a wipe saturated in alcohol.
For optimal connector performance, repeat the polishing
step using 0.3 µ m paper for 5 "traveling figure-8s," then
clean the endface with alcohol.
Note: If the connector is the SC style, snap the housing
onto the connector.
16. Inspect the core and cladding with the Greenlee
Fiber Microscope. Check the dB loss with a
Datacom Textron light source and an optical power
meter.
Do not use the microscope to examine a fiber optic
cable that is connected to a laser light source.
Failure to observe this warning can cause serious
eye injury and permanent blindness.
Greenlee Textron / Subsidiary of Textron Inc.
Fiber Optic Installation Kit
8
Ideal
No blemishes on core or cladding.
Good
Cladding is chipped, but core is not.
Poor
Scratch across core.
Try repolishing or else reterminate.
Unacceptable
Fiber has shattered.
Reterminate.
4455 Boeing Dr., Rockford, IL 61109-2988 815/397-7070