Gigabyte GA-8IRXP Manual Del Usuario página 19

J) F_PANEL (Conector de 2x7 contactos)
HD (IDE Hard Disk Active LED)
SPK (Speaker Connector)
RST (Reset Switch)
PD+/PD_G-/PD_Y-(Power LED)
PW (Soft Power Connector)
Conecte los LED de alimentación, de altavoz, del interruptor de reinicio y del interruptor de encendido
del panel frontal del chasis al conector F_PANEL de acuerdo con la asignación de contactos
detallada anteriormente.
S ) BAT (Battery)
+
RST-
PW+
RST+
PW-
SPK+ 1
PD+
PD_G-
SPK-
PD_Y-
1
HD-
HD+
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
Pin 2- Pin 3: NC
Pin 4: Data(-)
Open: Normal Operation
Close: Reset Hardware System
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 3: LED cathode(-)
Open: Normal Operation
Close: Power On/Off
CAUTION
v Danger of explosion if battery is incorrectly
replaced.
v Replace only with the same or equivalent
type recommended by the manufacturer.
v Dispose of used batteries according to the
manufacturer's instructions.
- 19 - Proceso de instalación del hardware