Lock Mode - Hammerhead HLCL360 Manual De Instrucciones

OPERATION

6. LOCK MODE

This mode cannot be used to perform horizontal or vertical leveling, because the
laser lines are no longer self leveling. In this mode, the LED indicator will always
illuminate in red.
a. Keep the power switch in the "OFF" position and press the mode button
to turn on the laser. The laser lines are now locked, and are no longer
self-leveling.
b. Press the mode button repeatedly to change the laser-projection mode.
c. Slope your self-leveling cross laser to project a straight line for reference.
In this mode, the laser lines are projected continuously and will not blink,
even if the slope angle exceeds 4°.
d. To turn the laser off, press the mode button repeatedly until the laser shuts off.
7. APPLICATIONS
Your self-leveling 360-degree cross line laser can be hand-held for point
marking and simple alignment by sight, or it can be used to make a "chalk line"
by using the lock mode. It also can be mounted on a standard 5/8" tripod (not
included) to project laser lines on walls. It is ideal for the following applications:
• Hanging pictures, photos, or artwork on walls
• Wallpapering and stencil work
• Framing doors and windows
• Installing electrical wiring and pipes
• Mounting wall fixtures, electrical outlets, switches and lighting
• Installing a drop ceiling
• Painting
• Installing closets
• Laying tile and flooring
12 SELF-LEVELING 360-DEGREE CROSS LINE LASER