Programming A Dvd Player/Vcr Combo - RadioShack Kameleon 4-in-1 Manual De Instrucciones

PROGRAMMING A DVD PLAYER/VCR COMBO

NOTE: If you own a Sylvania TV/DVD Player Combo that has a separate TV code
listed on page 73, use these instruction (including step 8) to program this device with
the following changes: in step 5, enter 0675 as the DVD code; in step 8a, substitute TV
for VCR; and in step 8b enter 0171 as the TV code.
1. Turn on the device and insert a DVD.
NOTE: Please read steps 2 to 10 completely before proceeding. Before starting step 2,
review the "Setup Codes For DVD Player/VCR Combos" (on page 70). Brands are listed
alphabetically in order of most popular ones first. Highlight or write down the devices
and codes you wish to program.
2. Press and hold P until the bottom IR segment flashes twice. The program
keys will appear:
NOTE: If the display turns off because of inactivity, you will need to start the pro-
gramming sequence again by repeating this step.
NOTE: To stop programming at any time, press
screen. Press
3. Press above DEV. SET. once. The Device Setup programming screen
will appear:
4. Press DVD once. The key will animate.
5. Use the Setup Codes For DVD Player/VCR Combos (on page 70) to locate
the brand name and use the number keys to enter the four-digit code for
your device. If performed correctly, the bottom IR segment will flash twice.
NOTE: If the bottom IR segment displays one long flash instead, an error has
occurred. Try entering the same code again.
6. Aim the remote at the device and press POWER once. The device should
turn off.
12 Programming A DVD Player/VCR Combo
4- -O
IN NE
once more to exit completely.
R P
EMOTE OWERED
once to return to the program keys
B K
Y AMELEON