Bayside EF22-33B Manual De Instrucciones página 4

The fireplace/heater unit comes in two distinct parts:
The fireplace unit itself, (Figure 2), and the Remote Control, (Figure 3).
Figure 2
 The Fireplace/Heater Unit
On the top right corner of the fireplace/heater unit is the control panel. This panel contains the buttons and displays to
properly operate the fireplace/heater unit. Refer to Figure 4 for placement of the control buttons.
Display Unit
Display Unit.
This segment will show information about flame level, flame speed, timer, and current Fahrenheit/Centigrade
temperature.
With the heater on, gently press and hold the main power button for five seconds to enter temperature converting mode.
Repeat the same process to convert Celsius temperature into Fahrenheit temperature.
Main Power button.
Press the power button to turn the fireplace/heater unit on and off. Press the power button once to turn the unit on. Press
again to turn the unit off.
NOTE: After the heater function or power is shutoff the blower will continue to run for several minutes to cool the
internal components.
OPERATION
Fireplace/Heater Front Panel Controls
Heater Control
Flame Color Adjustment
Flame Speed
Timer Function
Figure 4
4
Model No.
Frequency
Figure 3
Main Power
Brightness Adjustment
ELECTRICAL
SPECIFICATIONS
EF22-33B
Voltage 120 V
60 Hz
Watts 1500 W
E