BURGER KING DHB-BK Serie Manual De Instrucciones página 8

The EDIT PRODUCT NAME menu is used to change a default product name to one of your own choosing.
1
Press and hold the BURGER KING LOGO Button, then immediately press and hold the DAYPART/ENTER Button until the display shows one
of four programming menus.
Use the UP or DOWN Arrow Button to scroll to the
NOTE: The default names available for editing are: BACN, POP, MOZ, SPCY & EXP1 thru EXP9.
Burger King Logo Button
Press and release the DAYPART/ENTER Button to enter the
2
Edit Product Name menu.
Use the UP or DOWN Arrow Button to scroll through the list
of products. When the desired product is displayed, press
the DAYPART/ENTER Button to select it.
The first letter (in this case, the ) will start blinking.
4
When all four digits have been changed, press the
DAYPART/ENTER button to select the new name.
DHB-BK1 541-520 Rev. D
Changing the Product Name
L P O XXXX ⇑ ⇓
8
Product Holding Bin
(Edit Product Name) Menu.
To change the blinking E, use the UP or DOWN Arrow Button to
3
scroll to the desired letter/number/symbol. When the desired
selection is displayed, press the PAN Button to move to the
next digit. Repeat for all digits.
NOTE: Holding the UP or DOWN Arrow Buttons for longer than 2
seconds will cause the display to automatically scroll up or down.
5 The display will show
P O
Repeat Steps 2–4 for any other product.
Press and release the BURGER KING LOGO Button at any time to
exit the programming mode and return to the run mode.
NOTE: If the DAYPART/ENTER Button has not been pressed to save
any changes, the program will revert to the original names.
DHB-BK Series
DayPart/Enter Button
M ⇑ ⇓
.
Printed in USA 0506 © 2003