Load Led; Maintenance - Leviton MDNCT-2SC Manual Del Usuario E Instalación

4 GENERAL METERING FEATURES AND FUNCTIONALITY
CT Amperage startup screen,
no error conditions
Error screen showing a failure code,
factory service required
L 2
Error screen showing a power factor
installation error on Line 2
4.2

Load LED

The Load LED has a 10Wh pulse rate (5 watt hours on, 5 watt hours off) reporting
energy consumed. For dual-element meters, this is a combined value for Line 1 and
Line 2.
5

MAINTENANCE

Properly installed meters with proper connections should not require user maintenance. If the
meter is not functioning properly, please refer to the Troubleshooting guide in Section 6. If the
answer cannot be found there, contact Leviton technical support.
Figure 9 - Example LCD Screens
16
Screen 1: Real Energy,
no error conditions
L 1
Error screen showing a reverse current
installation error on Line 1
L 1 L 2
Error screen showing a low voltage
installation error on Lines 1 and 2
k W h