Publicidad
Idiomas disponibles
Idiomas disponibles
8
• Fasten stand to pipe. Do not pinch
heating cables.
• Loop and tape extra heating cable
to pipe.
9
• Remove
box nut.
O-ring
11
Optional: Knock
out drain hole
if installed on
bottom of pipe.
4 | nVent.com
Pipe strap
• Install grommet
plug in unused
opening.
• Slide strain relief
over heating cable,
down onto box nut.
• Secure strain
relief by tightening
screws.
WARNING: Fire and Shock Hazard.
To prevent cable damage and shorting,
position pipe straps under the heating
cable. Ensure the cable does not cross
over itself.
Glass cloth tape
10
12
• Slip the green/yellow
tube onto the braid.
• Trim the braid and tube
as required.
3SC heating cable
shown.
• Place junction box
onto stand. Align key-
ways in box hole with
alignment feature on
stand.
• Put box nut back onto
stand.
• Tighten box nut with
spanner.
3/4 in.
(20 mm)
Publicidad
