Basic Functions; Display Overview - auna multimedia ScreenStar Manual De Instrucciones

• On/Standby: Press STANDBY (
device is not in use for a longer time.
• Insert CDs: Press gently on the CD tray to open it. Insert CDs/CDGs with the printed side facing up. The
CD / CD-G will be read automatically. The display will show the total track number after a few seconds.
• Use the buttons
stop playback.
• Repeat: Press REPEAT repeatedly for REP 1 (current track will be repeated) - REP DIR (for MP3 playback
only: current directory will be repeated) - REP ALL (all available tracks will be repeated) - REP OFF
(repeat function is de-activated).
•
Programming a playlist:
This unit can be programmed to play up to 20 tracks/fi les in USB mode. Plug the USB fl ash drive and
select USB mode. (without pressing the PLAY/PAUSE button).
• Press PROGRAM/REPEAT button once in stop mode. "PRG P00:XX" will be shown on the screen.
• Press SKIP to select the desired track to be programmed.
• Press PROGRAM/REPEAT button again to save the selected track/fi les. P00 will jump to P01.
• Repeat steps 2–3 to program up to 20 tracks/fi le.
• Press PLAY/PAUSE button to play the programmed tracks after programming is completed. The
"PRG PLAY" indicator will appear on screen during the programmed
• To clear program and resume normal playback, press the STOP button twice during playback to
clear the programmed tracks.
Operation

Basic Functions

) to turn the device on/off . Disconnect from AC power when the

Display Overview

Global Functions
, / to navigate through media playback (CD/USB) and press to
23