LTO TS110A TRUESONIC Guia De Inicio Rapido página 8

SPECIFICATIONS
Output Power:
Active Crossover:
Max SPL @ 1m:
Frequency Range:
Frequency Response:
Max Input Level:
Transducer Low:
Transducer High:
Horn Coverage:
Connectors:
Cabinet:
External Control:
Protection:
Power supply:
Mounting:
Dimensions (H x W x D):
Weight (speaker only):
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2)
THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY
CAUSE UNDESIRED OPERATION.
300 W Continuous RMS (235 W LF + 65 W HF)
600 W Peak (470 W LF + 130 W HF)
2.5 KHz
120 dB Continuous, 123 dB Peak
53 Hz – 20 kHz (@ -10 dB)
70 Hz – 19 kHz (+ 3 dB)
+18 dBu (input impedance: 15 kΩ)
10" (254 mm) woofer, 2" (51 mm) voice coil
1" (25mm) exit with 1" (25 mm) neodymium compression driver
80/100° H x 60° V nominal
Mic/Line Input: two 1/4" TRS or XLR
Link Output: one XLR
Trapezoidal, with floor monitor capability. Injection molded, polypropylene
enclosure, with perforated steel grille
Volume, power on/off with LED, clip limiter with LED, ground lift
Over-excursion, thermal, driver
100-120 V or 200-240 V, 50/60 Hz
Inrush current at initial switch-on: 4.36 A
Inrush current after power supply interruption: 3.73 A
Integrated pole-socket (36 mm dia.), one handle, four M10-threaded
sockets (2 top, 2 bottom)
20.2" x 13" x 11.7" (513 mm x 330 mm x 297 mm)
26.6 lbs (12.1 kg)
www.altoprofessional.com
MANUAL VERSION 1.1