CAUTIONS ON ADDITIVES TO WATER
•
To maintain the wick's integrity and warranty, never add anything to the water
except Essick Air bacteriostat for evaporative humidifiers. If you only have
softened water available in your home, you can use it, but mineral buildup will
occur more quickly. You can use distilled or purified water to help extend the life
of the wick.
•
Never add essential oils in the water. It can damage the plastic seals and cause
leaks.
ASSEMBLY
1. Unpack humidifier from carton. Remove manual.
2. Remove all packaging materials. Some packaging material is located under the
fan assembly. Verify the following items are in the humidifier cabinet.
♦ 2 wick assemblies with
4 wicks installed
♦ 2 bottles
♦ Float with retainer ring
CASTERS
3. Turn the emptied cabinet upside down.
4. Insert each caster stem into one of the
four caster holes manually Do not use
tools. The casters should fit snugly
and be inserted until the stem shoulder
reaches the cabinet surface.
5. Turn the cabinet right side up.
REINSTALLING COMPONENTS
1. Reinstall float.
2. Reinstall wick assemblies
into cabinet.
3. Reinstall water bottles
NOTES ON LOCATION:
In order to get the most effective use from your humidifier, it is important to position
the unit where the most humidity is needed or where the moist air will be circulated
throughout the house such as near a cold air return. If the unit is positioned close to
a window, condensation may form on the window pane. If this occurs, the unit
should be repositioned in another location.
Place humidifier on a flat, level surface. Do NOT position the unit directly in front of
a hot air duct or radiator. If placing on carpet, use caster pads to ensure level
placement.
NOTE: The use of a buble level will ensure placement for proper bottle draining.
:
♦ 4 casters and 2 caster pads
♦ 2 bottle caps and 2 valve caps
♦ Manual & registration card
4