Safety Information - Italiana Camini MARIÙ Instalación Uso Y Mantenimiento

Dear Sir or Madam,
thank you for choosing our Mariù stove. Before using your stove, please read this booklet carefully so that you may exploit all its
features to the full in complete safety.
Please remember that the 1st ignition must be carried out by the Dealer, which verifies the installation and completes the guarantee.
The manufacturer cannot be held liable for any damage deriving from stove use following incorrect installation, incorrect
maintenance or misuse.

SAFETY INFORMATION

The stove is designed to heat the room it is installed in by radiation and by air movement from the front grilles. The heat is genera-
ted by automatic pellet combustion in the firebox.
The only risks which may derive from use of the stove are linked with non-compliance with the installation instructions, direct
contact with live electrical parts (inside) or with the fire or hot parts (glass, pipes and hot air outlet), and the introduction of
foreign substances. Only use wood pellets with 6 mm diameter, as fuel.
If components fail, the stove is fitted with safety devices which turn it off. This must be allowed to happen without interference.
For correct operation, the stove must be installed in compliance with the instructions on this technical sheet and the door must not
be opened during operation: combustion is managed automatically so no manual operations are needed.
Never put foreign substances in the firebox or hopper.
Do not use flammable products to clean the smoke duct.
Firebox and hopper components must only be cleaned using a vacuum cleaner, when the stove is cold.
The glass must be cleaned when COLD with a special product (e.g. GlassKamin) and cloth. Do not clean when hot.
Make sure the stove is installed and ignited by a qualified dealer, which must also complete the guarantee and take responsibility
for correct installation.
During stove operation, the outlet pipes and door reach high temperatures.
Do not keep objects which are not able to withstand heat in the immediate vicinity of the stove.
NEVER use liquid fuels to light the stove or rekindle the embers.
Do not block ventilation openings in the room where the stove is installed or air inlets in the stove itself.
Do not wet the stove, and do not put wet hands near electrical parts.
Do not fit reducers on the smoke outlet pipes.
The stove must be installed in a suitable place as regards fire regulations, and provided with all the facilities (power supply and
outlet) it requires for correct operation.
Before carrying out any maintenance, disconnect the device from the mains power supply.
Should ignition fail, DO NOT re-ignite until you have emptied the combustion chamber.
DECLARATION OF CONFORMITY
The undersigned EDILKAMIN S.p.A. with registered office at Via Vincenzo Monti 47 - 20123 Milan - Fiscal codes P.IVA 00192220192
Declares under its own responsibility as follows:
the wood pellet stove specifi ed below is manufactured in accordance with the 89/106/CEE Directive (Construction Products)
WOOD PELLET STOVE, trademark ITALIANA CAMINI, called MARIU'
MODEL: MARIU'
YEAR OF PRODUCTION: Ref. data tag plate
Compliance with the 89/106/EEC Directive is also determined by compliance with the European standard:
EN 14785:2006
The undersigned also declares as follows:
the MARIU' wood pellet stove complies with the requirements of the following European directives:
2006/95/CEE – Low voltage directive
2004/108/EEC – Electromagnetic compatibility directive
EDILKAMIN S.p.A. declines all responsibility for malfunction of the equipment in the event of substitution, assembly and/or alte-
rations of any sort carried out by personnel not working for or authorised by EDILKAMIN S.p.A.
SERIAL NO.: Ref. data tag plate
- 14
-