Tabla de contenido
Publicidad
Preparation
Wear the safety goggles to avoid injuring your
eyes while assembling the components.
1. Preparing the Gel Beads
Refer to the label on the bottle for
more information on how to soak
the gel beads properly before
assembly.
2. Charging the Battery
Charge the battery to bring it out of hibernation
before using for the first time.
Charging Time: Approx. 1 hour and 30 min
3. Preparing the Screwdriver
The package includes a screwdriver handle and a
double-head bit. The smaller end of the bit is for the T2
screws, and the bigger end is for the other screws.
4. Legend
(M3-A)
5. Cable Connection Instructions
100-240 V
Connect the black and orange cables to the ports with
50-60 Hz
the corresponding color.
Follow the instructions for cable connection and wiring to
avoid cable damage.
Refers to the accessories required
including such information as the screw
×6
model and quantity. For example, the
description in this illustration indicates
that six screws of the M3-A model are
required.
Indicates that the bottom of the robot is
displayed.
Refers to where the required accessories
are located in the screw box.
17
Publicidad
Tabla de contenido
