Introduction - LG K20 PLUS Guia De Inicio Rapido

Introduction

Service
You will need the following information when
activating service:
Your name, address and an eight-digit
number that you will use to access your
account (your personal identification
number, "PIN").
Your serial number (IMEI) and SIM card
number. To locate the serial number, remove
the phone from the box and remove the
battery cover from the phone. The serial
number is located near the bar code. It will
be either 14 or 18 digits. The SIM card
number can be located below the bottom
bar code on the back of the SIM card holder.
If your phone does not have a removable
battery, check the box label or phone
settings to locate the serial number.
Your choice of MetroPCS plan and services
including unlimited data, talk and text plans.
Install the battery, if applicable, and SIM card
in your new phone by following the step by
step instructions in this phone's User Guide.
Once your phone is powered up, dial
1.888.8metro8 (1.888.863.8768) to
connect with an activation representative
who will assist you in activating your phone.
You can also activate your phone online by
visiting metropcs.com. (As soon as your
service is activated, be sure to fully charge
the phone's battery before using it again.)
2