Descargar Imprimir esta página

Ferroli TERMO NOVARA Manual De Instalación, Uso Y Mantenimiento página 55

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

04 – select language
05 – standby mode
06 – buzzer
07 – initial loading
08 – stove status
4.6.1 Menu 01 – Adjust fans
The item of menu 01, if enabled, adjusts the speed of the supplementary fans (not available).
4.6.2 Menu 02 – Set clock
Before operating with the stove it is necessary to set the current time and date so that there is a reference for
possible chrono programming.
The electronic control device has a lithium battery mod. CR2032 of 3 Volt inside. It allows the internal clock with
own autonomy; if the clock signal does not appear when the stove is off or when switching the stove again a series
of "0000" appears, it means it has to be substituted and you need to call one of our service point authorised for its
substitution.
4.6.3 Menu 03 – Enable chrono
Allows all chronothermostat functions to be enabled/disabled.
Regarding the selection and entering of times, use the six buttons,
following the table in par. 4.2.
It allows to enable and disable all the thermostat functions programmed;
with the set ON you activate this function and it appears the led
[ D ] related to it.
When the daily, weekly, or week-end program is set you can see
on the upper right side of the display it appears the led [C].
By accessing the submenu: DAY PROGRAM, the daily
chronothermostat functions can be enabled/disabled and set.
It is possible to set two operation phases delimited by the times
set according to the following table where the OFF setting tells
the clock to ignore the command.
Meaning
Selection
Activation time
Deactivation time
Activation time
Deactivation time
04 – week-end program
01 - Italian
02 - French
03 - English
04 - German
Possible values
33 – Wednesday prog 4
34 – Thursday prog 4
35 – Friday prog 4
36 – Saturday prog 4
37 – Sunday prog 4
01 – week-end chrono
02 – start 1
03 – stop 1
04 – start 2
05 – stop 2
55
on / off
on / off
on / off
on / off
on / off
on / off
set
set
set
set
on / off
on / off
set
-
D
C
Menu level
Input
Dialogue box
TERMO-NOVARA
A

Publicidad

loading