Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Electrical
Hook-Up
Locate
nearest
120V A.C. wall socket
in
the location
desired,
preferably
on
inside wall. With
the humidifier
in the
desired
location,
route the electrical
cord
safely so no one will trip or upset the
humidifier.
Plug in the electrical
cord.
WARNING:
To reduce
the risk of
fire or shock hazard,
humidifier
should
be plugged
into a 120V A.C.
outlet.
Do not use extension
cords.
If the plug does not fit fully
in the outlet,
reverse
plug. If it still does not fit,
contact
a qualified
electrician
to install
the proper
outlet.
Do not change
the
plug in any way.
To reduce
the risk of electrical
shock,
this humidifier
has a polarized
plug (one
blade
is wider than the other).
This plug
will fit in a polarized
outlet
only one
way.
Water Fill
WARNING:
To reduce
the risk of
shock, always
unplug
humidifier
before
cleaning
or servicing.
This humidifier
is designed
for use with
the two water
bottles
that are located
under the pivoting
lid.
Open
the pivoting
lid of the humidifier.
Remove
the water
bottles
by lifting
them
straight
up and out of the cabinet.
Notice
the water
bottles
are designed
as
right and left hand units. Position them
in the correct
location
so the humidifier
can function
properly.
The water
bottles
should
rest in the front of the cabinet.
Each "E-Z-Fill
Side-Cap"
must be facing
the rear of the unit.
Each water
bottle
is designed
with an
"E-Z-Fill
Side-Cap"
that is easily
removable.
Remove the "E-Z-Fill
Side-
Cap"
on the side of the water
bottle
by
twisting
counterclockwise.
/ Fan Assembly
Pivoting
Lid
Left
"Side=Fill Cap" Should
A|ways Face Rear
6
Publicidad
Tabla de contenido
