Replacing The Hepa Media Filter; Cleaning The Foam Filters - Fuller Brush Spiffy Maid FB-SPFM.2 Manual Del Usuario

Replacing the HEPA Media Filter

Warning: Always unplug the vacuum from the
electrical outlet before removing the filters.
1. Remove the filter cover by pushing in on the tab
and rotating the cover out (Fig. 1).
2. Remove the filter by grasping the filter grips and
pulling the filter straight out of the machine (Fig. 2).
3. Replace with a new filter (do not wash and reuse).
4. Replace the filter cover by inserting the two tabs
in first then snapping the cover in place with the
large tab.
Pre-Motor Filter
1. Push the dust cup latch to remove the dust cup from the
vacuum (Fig. 1).
2. Remove the gray foam filter from the frame located at
the base of the main body (Fig. 2).
3. Shake or tap the filter to remove excess dust or replace
with a new filter (do not wash or reuse).
4. Replace the dust cup onto the vacuum (Fig. 4).
High Flow Dust Bin Filter
1. Push the dust cup latch to remove the dust cup from the
vacuum (Fig. 1).
2. Remove the white High Flow filter by grasping the top of
the filter and pulling straight up (Fig. 3).
3. Shake or tap the filter to remove excess dust or replace
with a new filter (do not wash or reuse).
4. Replace the dust cup onto the vacuum (Fig. 4).
Pre-Filter
1. Push the dust cup latch to remove the dust cup from the
vacuum (Fig. 1).
2. Remove the cyclonic filter holder (Fig. 5).
3. Remove the white High Flow filter by grasping the top of
the filter and pulling straight up (Fig. 3).
4. Remove the black pre-filter from the inside of the
cyclonic filter holder (Fig. 6).
5. Shake or tap the filter to remove excess dust or replace
with a new filter (do not wash or reuse).
6. Replace the pre-filter and the High Flow filter in the cyclonic filter holder.
7. Replace the dust cup onto the vacuum (Fig. 4).
Warning: Do not put filters in the dishwasher or clothes washing machine.

Cleaning the Foam Filters

Fig. 1
Fig. 1
Fig. 3
Fig. 5
11
Fig. 2
Fig. 2
Fig. 4
Fig. 6