Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Product may vary slightly from what is illustrated.
Fabric guide
1
2
3
Synthetic
Nylon • Silk
Polyester • Rayon
1. Spray nozzle
. Water-fill opening
. Fabric select dial
. Spray button
. 60° pivoting cord
6. Heel rest
7. Fabric guide
8. Water tank
9. Soleplate
4
5
6
Cotton Blends
Wools
Cotton • Linen
How to Use
This appliance is intended for household use only.
GETTING STARTED
• Remove any labels, stickers or tags attached to the body or soleplate of the iron.
• Please go to www.prodprotect.com/applica to register your warranty.
Note: Use ordinary tap water for ironing. do not use water proc essed through a
home softening system.
Important: For optimum performance, let the iron stand for 90 seconds before
beginning to iron.
FILLING WATER TANK
1. Tilt the iron and using a clean measuring cup, pour water
into water-fill opening (A) until the water reaches the MAX
mark on the water tank. Refill as needed.
2. Plug in the iron.
Tip: If unsure of a garment's fiber, test a small area (on an
inside seam or hem) before ironing.
A
Note: If you need to add water while ironing, unplug the iron
and follow above steps.
STEAM IRONING
The automatic shutoff feature in your iron works as follows:
• once the iron reaches appropriate temperature, it will turn
off after 30 seconds of inactivity if left on its soleplate or
tipped over on its side. If left vertically on its heel rest, it
0 seconds
will shut off after 8 minutes (B).
• As soon as you pick up the iron, it will start heating
8 minutes
again. Wait for iron to reheat completely before resuming
operation.
B
SMART STEAM® TECHNOLOGY
The Smart Steam® system automatically produces steam when you turn the fabric
select dial between settings 4 and 6. The higher the setting, the more powerful the
steam.
USING SPRAY
Tip: Use to dampen tough wrinkles at any setting (C).
1. Be sure the iron is filled with water.
2. on first use, pump the spray
C
button several times.
Publicidad
Tabla de contenido
