Daily Maintenance - Ideal Standard ULTRA FLAT S Manual De Instalación, Uso Y Mantenimiento

UK
USE AND MAINTENANCE INFORMATION FOR THE USER
THE PRODUCT IS TO BE USED FOR PERSONAL HYGIENE AT ROOM TEMPERATURE, MEANING BETWEEN 10°C AND 30°C. SHOWERING AT A TEMPERATURE
ABOVE 40°C IS NOT RECOMMENDED.
NOTE: DO NOT USE THIS PRODUCT ABOVE 55°C AS THIS MAY STRESS THE MATERIAL, CAUSING THE SHOWER TRAY TO DEFORM, AND MEANING IT WILL
WEAR MORE QUICKLY. THE MANUFACTURER SHALL NOT BE HELD LIABLE FOR DAMAGE CAUSED BY INCORRECT USE OF THE PRODUCT.
ULTRA FLAT S CHARACTERISTICS
ULTRA FLAT S IS A COMPOSITE MATERIAL, MADE UP OF NATURAL MINERALS AND RESINS. IT IS COATED WITH A TECHNICAL VARNISH WITH A MATT
FINISH. THIS COATING 800 1000 µM HAS EXCELLENT RESISTANCE PROPERTIES AND THE SURFACE IS FULLY REPAIRABLE.

DAILY MAINTENANCE

TAKING CARE OF ULTRA FLAT S IS QUICK AND SIMPLE. ALL YOU NEED TO DO IS CLEAN THE SURFACE WITH SOAPY WATER OR A NORMAL DETERGENT
TO REMOVE THE MAJORITY OF STAINS AND DIRT THAT MAY HAVE BUILT UPEPOSITED.
ABRASIVE OR GEL DETERGENTS USED WITH AN ABRASIVE SPONGE SUCH AS SCOTCH BRITE® ARE PARTICULARLY RECOMMENDED. RINSE THE TREATED
AREA AFTERWARDS. THIS HELPS TO MAINTAIN THE ORIGINAL MATT FINISH THAT DISTINGUISHES ULTRA FLAT S.
HOW TO PREVENT DAMAGE
THE SURFACE IS GENERALLY RESISTANT TO STAINS; NONETHELESS, USE OF AGGRESSIVE CHEMICALS IS NOT RECOMMENDED. THESE INCLUDE:
ACETONE, TRICHLOROETHYLENE, STRONG ACIDS HYDROCHLORIC ACID, ETC. , STRONG BASES SODIUM HYDROXIDE, ETC. , INDUSTRIAL DETERGENTS
AND VARNISHING SOLVENTS. DO NOT USE METAL SCRAPERS, IRON BRUSHES OR OTHER DOMESTIC METAL TOOLS TO REMOVE STAINS, VARNISH,
SEALANT OR SIMILAR. SOME SUBSTANCES SUCH AS INK, COSMETICS AND DYES MAY LEAVE COLOURANT ON THE SURFACE OF ULTRA FLAT S WHERE
THERE IS PROLONGED CONTACT. THE SAME APPLIES FOR LIT CIGARETTES. THIS CAN BE REMOVED BY FOLLOWING THE INSTRUCTIONS BELOW.
REMOVING STUBBORN STAINS, SCRATCHES AND BURNS ULTRA FLAT S CAN BE RESTORED TO ITS ORIGINAL STATE FOLLOWING SURFACE DAMAGE
SUCH AS SCRAPES, CIGARETTE BURNS AND STUBBORN STAINS SIMPLY BY FOLLOWING THESE INSTRUCTIONS. FOR MINOR DAMAGE, USE A SCOTCH
BRITE® 3M REGISTERED TRADEMARK ABRASIVE SPONGE AND A STANDARD ABRASIVE DETERGENT. IF THE MARK IS STILL VISIBLE, CLEAN AGAIN
FINISHING WITH VERY FINE SANDPAPER.
WARRANTY
THIS PRODUCT HAS BEEN MANUFACTURED WITH TOP QUALITY MATERIALS AND COMPONENTS AND HAS UNDERGONE THE TESTS REQUIRED BY THE
MANUFACTURER'S CERTIFICATION STANDARDS AND BY APPLICABLE NATIONAL AND EUROPEAN STANDARDS. PRODUCT WARRANTY TAKES EFFECT
AS OF THE PURCHASE DATE OF THE PRODUCT, AS SHOWN ON THE INVOICE OR RECEIPT AND FOR THE PERIOD GRANTED UNDER APPLICABLE LAW.
PRODUCT WARRANTY GRANTED BY LAW ONLY COVERS DEFECTS APPEARANCE, DIMENSION, OPERATION EXISTING AT THE TIME OF DELIVERY
RESULTING FROM MANUFACTURING ERRORS, AS VERIFIED AND CONFIRMED BY THE MANUFACTURER'S AFTER SALES SERVICE TECHNICAL STAFF.
THE WARRANTY IS VALID WHERE:
• INSTALLATION HAS BEEN PERFORMED TO A HIGH STANDARD WITH THE SHOWER TRAY SQUARE WITH THE WALLS AND THE FLOOR LEVEL.
• THE PRODUCT HAS BEEN CHECKED BEFORE INSTALLATION.
• LEAKS HAVE BEEN CHECKED FOR DURING INSTALLATION
• PRODUCT MAINTENANCE AND CLEANING HAVE BEEN PERFORMED IN LINE WITH THE INSTRUCTIONS IN THE MAINTENANCE AND CARE MANUAL.
THE WARRANTY IS NOT VALID WHERE:
• THE USE AND INSTALLATION INSTRUCTIONS LISTED HERE HAVE NOT BEEN RESPECTED.
• MODIFICATIONS AND CUSTOMISATION ARE PERFORMED BY THE INSTALLER/USER WITHOUT THE MANUFACTURER'S AUTHORISATION.
• BREAKAGE/ACCIDENTAL DAMAGE IS CAUSED BY KNOCKS/IMPROPER USE.
• IT IS A CASE OF NORMAL PRODUCT WEAR.
• DAMAGE IS CAUSED BY DISASTERS SUCH AS FIRES OR NATURAL DISASTERS, INCLUDING FLOODS, EARTHQUAKES, ETC.
THE EQUIPMENT MUST BE INSTALLED BY QUALIFIED PERSONNEL IN COMPLIANCE WITH THE CURRENT STANDARDS IN FORCE RELEVANT TO CIVIL
ELECTRIC AND HYDRAULIC SYSTEMS.
ECOLOGICAL NOTES
UPON COMPLETION OF INSTALLATION, PLEASE REMEMBER TO DISPOSE OF THE PACKAGING AND ASSEMBLY WASTE IN ACCORDANCE
WITH THE REGULATIONS IN EFFECT IN THE COUNTRY WHERE THE PRODUCT WILL BE USED.
INFORMATION
FOR INFORMATION ON OUR SUPPLIERS OR SALES NETWORK, OR TO REQUEST
BROCHURES, INFORMATION REGARDING THE SHOWROOM OR TRAINING COURSES,
PLEASE CONTACT THE FREEPHONE NUMBER:
MONDAY TO SATURDAY FROM 7.30 AM TO 11 PM.
8