Description Of The Kit; Safety Notices; Optional Module Description; Enclosure Size 3 Ip20 Kit Installation Procedure - WEG SSW-07 Guia De Instalacion

1. DESCRIPTION OF THE KIT

Contents:

2. SAFETY NOTICES

DANGER!
Disconnect the supply of the Soft-Starter SSW-07/SSW-08 before installing
the IP20 kit.

3. OPTIONAL MODULE DESCRIPTION

This optional module has the function to protect against contact to energized
parts.
The Enclosure Size 3 IP20 Kit is connected directly to the SSW-07/SSW-08. The
module is fixed close to the power terminals, both at the line input and at
output to the motor.

4. ENCLOSURE SIZE 3 IP20 KIT INSTALLATION PROCEDURE

1. Contents of the kit.
2
Table 1 - Contents of the Kit
SSW-07/SSW-08 Enclosure size 3 IP20 Kit (Part number: 10413866)
Quantity
1 Enclosure size 3 IP20 optional kit
Description
2. Fix the bottom cover at the holes
located on both sides of the power
terminals.