Electrolux 300 Serie Guía De Uso Y Cuidado página 25

4. Rinse the drawer and inserts with
hot tap water to remove traces of
accumulated powders and liquids.
Large amounts of fabric softener resi-
due may indicate improper dilution or
more frequent cleaning is required.
5. To clean the drawer opening, use
a small brush to clean the recess.
Remove all residue from the upper
and lower parts of the recess.
6. Replace the insert by pressing it in
place until you hear a slight click.
7. Return the dispenser drawer to the
unit.
Cleaning the Adaptive Dispenser™
1. Remove the drawer by pulling the
dispenser out until it stops.
2. Reach back into the right rear corner
of the dispenser cavity and press
down firmly on the lock tab. Pull
out the dispenser drawer.
Care & Cleaning
3. Remove the detergent cup and top
cover from the dispenser drawer.
4. Remove the bottom cover from the
dispenser drawer.
a) First, pull the two lock tabs at the rear
of the dispenser drawer to unlatch
the back cover.
b) Then, gently pull back the two clips
on the front of the bottom cover to
to fully release it from the dispenser
drawer.
5. Rinse the dispenser drawer, covers,
and detergent cup with hot tap water
to remove traces of accumulated
powders and liquids. Large amounts
of fabric softener residue may indicate
improper dilution or more frequent
cleaning is required.
6. To clean the dispenser drawer open-
ing, use a small brush to clean the
recess. Remove all residue from the
upper and lower parts of the recess.
7. Reassemble dispenser drawer and
check to ensure that all pieces are
securely in place.
8. Return the dispenser drawer to the
unit.
25