Luda Elektronik horseAlarm Guia Del Usuario página 15

When the measured sweat level is as high as your alarm level (or higher), the receiver starts to
alarm with red light and beeping. To turn off the alarm, let go of the sensors and press the (C) but-
ton.
Advanced Mode:
Advanced Mode, (which also can be called Graph Mode or History Mode), is entered by pressing
the (D) button and tells the user how the horse has been during the last 6 hours.
When used to demonstrate its functionality, it is recommended to reset the transmitter by taking
out one of the batteries from the transmitter and insert it again. This will make the transmitter send
more rapidly to simplify the demonstration.
In demonstration mode the whole display is filled with diagram information in 10 minutes.
When used as normal, (4 min after it has been reset), it takes 6 hours to fill the display with
graphs of the horse's behavior.
Lay the transmitter down on various sides and simultaneously grip the sweating sensors to create
diagrams similar to the ones below:
The alarms work in the same way as in Simple Mode.
The next step is to start the installation, please go to chapter 8.
- 15 -
EN
DE
ES FR
FI
SV
IT
FR
PL
SV