Battery Replacement - Gima 20480 Guía De Uso

ENGLISH
6
Stop watch
Under normal display, 1 x press B
enter stopwatch mode,
1 x press D Start/stop to counting time
1 x press C clear data.
1 x press B, back to normal display.
12/24 Hours
Under normal display , 3 x press B,
enter time setup mode,
2 x press C enter 12/24 switch mode,
press D until 12/24 displays.
1 x press B back to normal display.
EL background light
1 x press A, EL light on 3 seconds.
Set Alarm
Under normal display.
2 x press B, enter alarm mode, hour flashes, press D to adjust the hour, then
press C, minute flashes, press D to adjust minute, press B back to normal
display.
Alarm On/Off
Press C(don't remove), press D at the same time to set ON/OFF of alarm.
Alarm keeps on 1 minute.
Hourly bell
Press C(don't remove),press B to set hourly bell on/off. When hourly bell is
on, all week day display in on.
Otherwise means hourly bell is off.

Battery replacement

On the back of the watch, there is a notch to open the housing and get to
the battery. Lift the rear with a sharp and thin instrument. Remove the metal
cover and the battery by sliding it on the side.
Insert the new battery complying with the correct polarity with the "+" facing
up. Replace the metal cover and close the case.
Weight: 45g
Battery: 3V Lithium Battery CR2025