Sliding Speaker - LG UB85 Serie Manual Del Propietário

CAUTION
Disconnect the power first, and then move or
install the TV. Otherwise electric shock may
occur.
If you install the TV on a ceiling or slanted wall, it
may fall and result in severe injury.
Use an authorized LG wall mount and contact
the local dealer or qualified personnel.
Do not over tighten the screws as this may cause
damage to the TV and void your warranty.
Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
covered by the warranty.
NOTE
Use the screws that are listed on the VESA
standard screw specifications.
The wall mount kit includes an installation manual
and necessary parts.
The wall mount bracket is not provided. You can
obtain additional accessories from your local
dealer.
The length of screws may differ depending on the
wall mount. Make sure to use the proper length.
For more information, refer to the manual
supplied with the wall mount.
When attaching a third-party wall mounting
bracket to the TV, insert the wall mount inner
spacers into the TV wall mount holes to move
your TV in vertical angle. Please make sure not
to use the spacers for LG wall mounting bracket.
(Only UC97**, UG88**)

Sliding speaker

(Only 98UB98**)
1 When TV is turned ON - the hidden speaker slides
out from inside the TV.
2 Go to Settings
speaker to set Sliding Speaker.
- Please Do Not use excessive force during
operation of internal sliding Speaker as it may
cause it to malfunction.
- Make sure Speaker is in OPEN position when
viewing TV as sound will be abnormal or
distorted.
3 When transporting the TV, make sure that the Sliding
Speaker is closed. If the Sliding Speaker is open
when being transported, it may become damaged,
resulting in malfunction.
- To close the Sliding Speaker, go to Sound
Sound Out
when TV is turned on' and press the
button.
Wall Mount
Inner Spacer
ASSEMBLING AND PREPARING
Sliding speaker
Sound Sound Out Sliding
Sliding speaker, select 'Opens
(POWER)
25