Publicidad
Idiomas disponibles
Idiomas disponibles
Source
This menu allows you to name/label the accessory devices you have connected
to the
external inputs/outputs.
O
Select Source
in the Setup menu.
O
Press the cursor
right to enter the list of types of devices connected
to the selected
input.
Select the accessory device with the cursor
up/down.
When
you select AV|,
AV2, AV3, HDMI,
Side or Analog Audio
In, a list appears
allowing
you to identify which type of accessory device is attached to this input.
The TV detects
the presence of the connected
device and the signal is routed
appropriately.
The TV can output
Digital audio via the DIGITAL AUDIO OUT(SPD|F
OUT)
connector
to an external amplifier
or receiver.
If your amplifier
or receiver
has a matching connector
for Digital Audio In, you can
connect
it with a single cable to the TV's DIGITAL AUDIO OUT(SPD|F
OUT).
See Connect
Accessory
Devices, Digital Surround
Receiver, p. 23.
Clock
This allows you to use your TV as a clock.
Note:
Adjusting the clock is necessary for the correct working of Lock after (See TV settings, Channels,
p. 17) features,
Closed captioning will not be displayed when the clock is being displayed Press the clock
key again to switch off the clock if you want to see closed caption.
Auto
clock
mode
Select Clock in the Setup
menu.
Press the cursor
right to select
the Auto
clock
mode.
Press the cursor
right to instruct
the TV to get the time automatically
or manually.
Auto
clock
channel
(only available when Auto dock mode is set to Automatic)
With
the cursor
buttons, select the channel number where time can be found by the
TV. Typically
time can be found on PBS as well as some other
channels.
Note: If Manual has been selected in the Auto clock mode, the Auto clock channel menu
item can not be selected.
Time
= Day (only available when Auto clock mode is set to Manual)
With
the cursor
buttons,
select
and enter
the correct
time and day.
If Auto
clocl_ mode
Manual
has been
selected,
and no clock search
has been done,
the system
will keep the entered
time and day.
Time
zone
(only acailablewhen Auto dock mode is set to Automatic)
This function
allows you to select your local time zone. Broadcasted
time
information
will correct
the clock display for your local time.
_[_ Select Time
zone with the cursor
down.
Press the cursor
right to select your local time zone.
Daylight
saving (only availablewhen Auto clock mode is set to Automatk_
Daylight saving time is automatically
set by specially broadcasted
signals. This menu
item allows you to disable the automatic
setting
of daylight saving time. This is useful
if you live in an area or state where daylight saving is not applied, but you receive
channels from other areas where
daylight saving signals are broadcasted.
_[_ Select Daylight
saving with the cursor
down.
Press the cursor
right to select
Automatic
for automatic
clock correction
for
daylight saving time, based
on specially
broadcasted
signals.
Select Off to disable automatic
clock correction
based on the specially
broadcasted
signals.
13
English
DFU 37131.indd
13
_
2006-03-29
6:30:52
PM [
Publicidad
