Helpful Tips - Nexia Bridge BR100 Guia De Inicio Rapido

UNDErSTANDING ThE BrIDGE—ADvANcED INFOrMATION
Light
slow blink
fast blink
Orange
(Z-Wave)
solid
flicker
solid
flicker
2 blinks
Green
(Server)
3 blinks
no light
(but orange
light is solid)
Need HeLp?
For installation help
and videos, visit
nexiahome.com
Condition
Waiting for enrollment or exclusion to begin
Enrollment or exclusion is taking place
At least one Z-Wave device was enrolled or
excluded
Z-Wave activity is detected on local network
Connected to the server
Information is being exchanged with server
Bridge does not have an IP address. Verify
that bridge is connected to router and that
router DHCP is enabled
Bridge has contacted server but connection
was denied. Verify correct MAC address. If
problem persists, call us.
Ethernet cable not connected
For assistance, call
877-288-7707
u s i n g Y O u R s Y s T E M
Light
solid
Blue Schlage
slow blink
solid
Blue, Green and Orange
no light
blink for
Green and Orange
5 seconds
Ethernet solid or
lights blinking
»

hELPFUL TIPS:

Verify you have an open router port and outlet to connect to
the Nexia Bridge.
Place the Nexia Bridge in an open space. Avoid setting it atop
other electronic devices or in metal enclosures.
Everything you need—from step-by-step instructions to
short, helpful videos—is located right at your fingertips in
the Nexia web portal. You'll be able to run your home from
wherever in no time at all!
Condition
Bridge is powered by A/C
Bridge is powered by battery
low battery, when bridge not connected to
A/C and battery is installed
No A/C or battery
Occurs during reset. After reset, orange light
will continue to blink for 5 seconds.
Internet connected
Nexia Bridge Quickstart Guide 5