EVERSPRING SE801 Guía De Usuario página 2

SE801 Solar Siren
Installation Instructions
General Introduction
The SE801 is an outdoor siren powered by solar energy and rechargeable battery. By
its visible presence, the external siren indicates that an alarm system is installed and
deters intruders. In case of intrusion, it alerts the neighborhood by its powerful 110
decibels piercing sound and a flashing red light. Its great compatibility with our U-Net
family security products makes it suitable for smart home cloud based platforms such
as Homesys.
Product Overview
FRONT VIEW
Solar Panel
Strobe
light &
red LED
6V 1.2Ahr
rechargeable
battery
9V initial power
up battery
INSIDE VIEW OF SIREN MAIN BODY
(BACK COVER REMOVED)
Control Box –
hidden under
water proof cover
(below)
Control
box
cover
Binding with Homesys
1. Open up the siren by removing the fixing screw from the bottom edge and
carefully peeling off the back cover. All electronic components are housed
within the front cover.
2. A 9V Alkaline battery is supplied to boost the initial power to the unit when it is
first activated until the Solar Panel charges the main battery. Locate the battery
clips of this 9V battery but do not connect it up yet.
3. Log into the Homesys account from a web browser.
4. Select "System".
5. Select "Add a New Device", then "Solar Siren".
6. The following screen will appear. This means the gateway is entering binding mode.
1