About This Product - NARDA SignalShark 3320 Guia De Inicio Rapido

2

About this product

The SignalShark 3320 Remote Unit exists in different module versions
which are adapted for remote control applications. It can be used as a
stand-alone unit for desktop (optionally with equipment feet) and system
operation. Narda also offers the SignalShark 3320 as modular units for
installation in a 19'' rack.
All SignalShark types support the same GUI. The SignalShark 3320 can be
operated via a remote desktop connection or by using an external monitor,
a keyboard and a mouse. The SCPI command reference and VITA 49
compliant I/Q streaming allow easy integration into any software environ-
ment.
The SignalShark 3320 features a highly sensitive and dynamic RF front-end
with four switchable RF inputs. The spectrum analyzer works ultrafast in
scan mode (40 MHz real-time bandwidth). It calculates FFTs of up to
16,384 points with at least 75% overlap.
There is also an independent receiver path (40 MHz real-time bandwidth).
The center frequency and the channel bandwidth are freely selectable. The
path allows you to perform channel level measurements, modulation
analysis, audio demodulation, and I/Q streaming.
The SignalShark 3320 supports the automatic direction finding antennas
from Narda. Bearing cycles down to 1.2 ms are possible. The integrated
map and localization software allow reliable localization, even in urban envi-
ronments.
Due to its precise time stamp synchronization and Vita 49 I/Q streaming, the
SignalShark 3320 offers an excellent TDOA-based localization system. As
reference clock, you can select the PPS signal of the internal GNSS
receiver, or that of the ADFA's GNSS receiver, or from a dedicated PPS
input.
The CPU of the SignalShark 3320 is designed to run third-party software
and scripts. This allows you to easily extend its capabilities or build your
customized stand-alone system.
Narda SignalShark 3320 Remote Unit 23